ALLEN & HEATH iDR10 Manual de usuario descargar pdf (Pagina 9)

1716

Specifications

Format:

Distributed dual network audio and TCP/IP control

Separate DSP mix rack and control surface

3x surface sizes

Up to 64x input channels

Up to 32x assignable mixes

16 DCA groups

Up to 10x 8 channel IO cards in mix rack (80x in/out)

Up to 4x 8 channel IO cards in surface (32x in/out)

Surface strips assignable as:

Channels, mix masters, DCA masters, PAFL masters, MIDI controllers

One knob per function channel processing strip

Surface control:

iLive-80 (20 faders, 4 layers = 80 assignable strips)

iLive-112 (28 faders, 4 layers = 112 assignable strips)

iLive-144 (36 faders, 4 layers = 144 assignable strips)

iLive-176 (44 faders, 4 layers = 176 assignable strips)

Multi-colour backlight LCD virtual ‘write-on’ strip and mix status

Control strips – fader, pan, MIX, MUTE, PAFL, SEL, LCD, meter

Touchscreen with function keys

User assignable soft keys

Analogue style channel strip for instant access

Rotary controls with LED position display

Additional graphic display of parameters on touchscreen

Surface LED/LCD and touchscreen dim controls

Surface lock function

Analogue mic/line inputs (8x per module):

Digitally controlled preamp

ADC 24-bit multi-bit delta sigma

108dB dynamic range

Balanced female XLR, pin 2 hot

Impedance 2k ohm, >10k ohm (pad in)

Gain +10 to +65dB, -15 to +40dB (pad in)

Resolution 1dB steps

Pad 25dB

Maximum input +30dBu (pad in)

Noise EIN (150 ohm) -127dB

Module LEDs 48V, CHK (PAFL)

Analogue line outputs (8x per module):

DAC 24-bit multi-bit delta sigma

114dB dynamic range

Balanced male XLR, pin 2 hot

Impedance < 75 ohm

Nominal output +4dBu

Maximum output +22dBu

Residual output noise -94dBu

Module LEDs MUTE, CHK (PAFL)

Digital inputs (8x channel = 4x stereo pairs):

Select one of three formats per pair:

AES3, SPDIF, Optical

Sample rate conversion selectable on each pair

Module LEDs SEL, CHK (PAFL)

Digital outputs (8x channel = 4x stereo pairs):

Three formats simultaneously available:

AES3, SPDIF, Optical

DARS (digital audio reference signal) master clock

Module LEDs MUTE, CHK (PAFL)

Audio networking:

2x 64 channel bi-directional EtherSound networks

Compatible with standard EtherSound network devices

ESA for surface/breakout audio (replaces multicore)

ESB option for system expansion (FOH/monitor split, sys-link, multitrack)

Maximum CAT5 cable length 100m / 330 feet (depending on cable used)

Can work with third party optical fibre / dual redundant systems

Control (available on each mix rack and surface):

TCP/IP Ethernet – mix rack, surface, touchscreen

Integrated 3-port Ethernet switch

Maximum CAT5 cable length 100m / 330 feet

Can work with standard Ethernet optical fibre / dual redundant systems

MIDI (mix rack and surface)

PL-Anet for A&H PL-Series controllers (mix rack and surface)

Digital signal processing module:

48kHz sampling

24-bit, 48-bit data in EQ processing

System latency < 2ms rack in to out, < 2.25ms surface in to out

General performance:

Frequency response 20-20kHz +0/-0.5dB

THD+N < 0.004% (1kHz, mic +35dB to line out)

Channel separation > 95dB

Audio architecture:

Inputs can be stereo linked

32 mixes assignable as:

Mono/stereo groups,

Mono/stereo internal effects

Mono/stereo auxes

Main mix – M, LR, LCR, LCR+, LR+Sub, LCR+Sub, LR+M, LCR+M

Mono/stereo matrix

Inserts assignable on every input and mix

Patchable channel direct outs and bus in/outs

Switchable mono/stereo PFL or AFL

Audio routing:

Input virtual patchbay

Output virtual patchbay

EtherSound routing

Insert patchbay

User pre/post send and direct out options

Audio metering:

16 LED main channel/mix meters

Extensive metering on processing strip

Peak indication across fader layers

Dedicated PAFL meters

Dedicated touch screen meter mode

Audio monitoring:

2x headphone amps (mix rack and surface)

2x sockets on surface - standard and 3.5mm mini jack

Surface local stereo monitor balanced XLR line outputs

Surface stereo PAFL balanced XLR audio inputs

Select and listen to any point in the signal path

Input and mix PFL or AFL in-place selection

PFL overrides AFL

Cancel all PAFL function

Auto cancel or additive PAFL mode

AFL trim up to 12dB gain

Dual engineer’s monitor mode (wedge/in-ear systems)

PAFL indication at mix rack (CHK indicators)

Solo-in-Place with SIP safes

Input channel processing:

Preamp – gain, pad, polarity, 48V

HPF – 12dB/octave swept 20-400Hz

Noise gate – threshold, depth, hold, attack, release, sidechain

PEQ – 4 band fully parametric, shelf selectable on HF and LF

Compressor – threshold, ratio, attack, release, auto, soft knee, gain, sidechain

Limiter/de-esser – threshold, de-ess frequency, sidechain with key filter listen

Delay – up to 170ms

Mix processing:

PEQ – 4 band fully parametric, shelf selectable on HF and LF

GEQ – 1/3 octave, 25 band, touch screen and fader control

Compressor – threshold, ratio, attack, release, auto, gain, sidechain

Limiter – threshold, sidechain with key filter listen

Delay – up to 340ms

Effects processing rack:

2x internal stereo effects (6x with processing option)

Output processing rack (option):

Provides more effects or output processing

Memories:

Libraries – Gate, PEQ, GEQ, Comp, Limiter, De-esser, FX

Scenes – selectable parameters, safes, can be named

Shows – Configuration, current settings, all scenes, libraries

USB memory key library and show archive

Additional functions:

User assignable channel LCD names, 5 characters

User assignable channel LCD colours, 6 colours + off

Alt view channel LCD display / encoder function

Freeze in layers strip function

Assignable permissions for up to 8x users

User assignable meter screens

Simultaneous view of all graphic EQ bands on faders

Talkback assignable to any combination of mix buses

Internal signal generator:

Swept frequency sine wave, swept bandpass, white, pink noise

Copy/paste/reset editing of channel and mix parameters

Quick all channel mix assign and pre/post selection

8x assignable soft keys

Power supplies:

2x mix rack psu modules (Second for redundant backup)

1x surface internal psu module

Optional iPS10 2U rack psu for surface redundant backup

Mix rack power requirement 100-240V.AC, 47-63Hz, 320W max

Surface power requirement 100-240V.AC, 47-63Hz, 320W max

Temperature monitoring at surface of all supplies and circuits

Dimensions (Width x Height x Depth):

Mix rack 482mm (19”) x 400mm (15.75”) 9U x 350mm (13.8”)

Mix rack flightcase 643mm (25.3”) x 730mm (28.75”) x 669mm (26.34”)

Surface iLive-80 753mm (29.6”) x 353mm (13.9”) x 707mm (27.7”)

Surface iLive-112 1006mm (39.6”) x 353mm (13.9”) x 707mm (27.7”)

Surface iLive-144 1206mm (47.5”) x 353mm (13.9”) x 707mm (27.7”)

Surface iLive-176 1406mm (55.35”) x 353mm (13.9”) x 707mm (27.7”)

Flightcase iLive-112 1107mm (43.6”) x 1017mm (40”) x 452mm (17.8”)

Flightcase iLive-144 1307mm (51.46”) x 1017mm (40”) x 452mm (17.8”)

Flightcase iLive-176 1507mm (59.33”) x 1017mm (40”) x 452mm (17.8”)

iPS10 psu 482mm (19”) x 88mm (3.46”) 2U x 310mm (12.2”)

Weights:

Mix rack 26kg (57 lb), 68kg (150 lb) in flightcase

iLive-80 39kg (86 lb), no flightcase

iLive-112 43kg (95 lb), 98kg (216 lb) in flightcase

iLive-144 48kg (106 lb), 114kg (251 lb) in flightcase

iLive-176 54kg (119 lb), 124kg (273 lb) in flightcase

iPS10 psu 6kG (2.7 lb)

* Not all the listed functions are available at first product ship. Some

functions will be introduced in planned future software releases.

** We reserve the right to make changes in the interest of further product

development.

1 2 3 4 5 6 7 8 9 10 11

Comentarios a estos manuales

Sin comentarios

ALLEN & HEATH iDR10 Manual de usuario Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Controladores de dj ALLEN & HEATH iDR10