ALLEN & HEATH ML5000 Manual de usuario descargar pdf (Pagina 6)

LCR PLUS SYSTEM//.

The ML5000 LCRplus system extends signal

imaging beyond conventional LR and LCR

panning by allowing full 3 speaker balance

and positioning from each channel and

group. This easily satisfies the standard

requirements of mono, stereo and

conventional LCR speaker systems, as well

as providing a unique extended capability.

For example, a backing instrument such as guitar typically routed

to the LR speakers can be brought up in the centre speakers for

the duration of a lead solo to improve focus and clarity.

Alternatively, in non-ideal situations where the three speakers do

not reach all the audience evenly, a small portion of centre

cluster lead sounds such as vocals can be blended into the LR

stacks so improving coverage. Or, use the C output to feed a

centre fill speaker with selected sounds, for example stage mics

without the front ‘float’ mics that would otherwise feed back if

routed to the nearby fill.

All this is made possible using just two controls and a single switch:

MAIN MIX - This switch routes the audio to the 3 buss main

output. The balance between the outputs is determined by:

BLEND - A new control which adjusts the balance between the

LR and C outputs.

PAN - Provides conventional panning between L and R. How

much signal is available to LR is set using the blend control.

PAFL//.

Input channels can be auditioned pre-fade (PFL) or after-fade

(AFL) depending on master section status. Entire VCA groups

can be auditioned with a single button press. Input AFL is in-

place summing C into L and R so that the balance within the mix

can be checked in the stereo monitor. The 32 group, aux and

matrix outputs can be checked using AFL. Stereo is automatically

selected by pressing two related buttons together, perfect for

checking stereo in-ear monitors.

The ML5000 PAFL system is processor controlled providing a

functionality well beyond any hard switched system. Features

include timed action for momentary or latched operation, input

PAFL override output AFL, auto cancel or add mode, single

button all-clear, input PFL /AFL selection and stereo AFL logic.

MUTE SYSTEM//.

8 Mute Groups - These allow selected combinations of channels

to be muted with a single button press. All channel, output and

matrix mutes can be assigned. Multiple groups can be selected

and the editing includes a useful clear/set all function.

128 Mute/VCA Snapshots - These onboard memories store and

recall console mute and/or VCA assignment settings. Either or

both can be disabled from the snapshots according to operating

preference, to disable the system when not used, or to use it as

a MIDI controller only. A global clear/set function is available for

quick setup and snapshots can be previewed prior to recall.

There is a read-only mode to prevent favoured settings being

overwritten by guest operators.

Solo In Place - This mode provides a ‘destructive’ solo function that

mutes all channels except for the one or more being checked, used

for listening to the contribution of individual signals in the mix during

sound check. A two button press is needed to enter SIP mode,

preventing accidental operation during performance. Advanced

functions include solo safes setup, clear all and toggle last solo.

Safes - There are two Safe setups which can be created. One

isolates selected channels from control by snapshots, groups

and MIDI - ideal for those ‘on-the-fly’ changes made to the pre-

programmed show. The other lets you define which channels

are safe from Solo In Place activity, for example main outputs

and effects return channels that should not be muted when a

solo is selected.

A&H//ML5000

EXAMPLE SETTINGS//.

Set BLEND fully clockwise to route the

signal to C only. LR is not used.

MONO PA

Set BLEND fully anticlockwise to route

the signal to LR only. Use LR to pan

conventionally between the stereo

speakers. C is not used.

STEREO PA

Initially set BLEND fully anticlockwise

to set up the main LR mix. Then rotate

BLEND clockwise to bleed signal to the

fill speaker as required. At centre position

equal signal is fed to all three outputs.

Beyond centre the LR level would

drop significantly.

STEREO + CENTRE FILL

Set BLEND to balance between the LR

and C speakers. Use PAN to adjust the

LR balance. To position between L and

C set PAN fully left and adjust BLEND.

To position between C and R set PAN

fully right and adjust BLEND.

LCR PANNING

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comentarios a estos manuales

Sin comentarios

ALLEN & HEATH ML5000 Manual de usuario Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Mezcladores de audio ALLEN & HEATH ML5000