Note - If you have problems with your router and laptop set to DHCP then try
using static IP addressing, but only for stand-alone systems not connected to
a larger network. Set your router and laptop wired or wireless connection for
static addressing and allocate compatible IP addresses.
Security We strongly recommend that you enable Wireless Security on your
router to prevent unauthorised access. By enabling WPA/PSK encryption the
iLive system will remain private from other laptop users. A wireless key or
passphrase will be required. Keep a note of the wireless key entered.
SSID This is the name broadcast by the router to identify the wireless
network to the laptop. It is recommended that you set a unique SSID using
the router setup menu to help differentiate between the wireless networks
seen by the laptop.
Working with Wifi Position the wireless router within its specified operating
range from the laptop, but make sure it is not too close to your laptop. We
recommend at least 3m (10 feet) minimum distance. For best performance
keep it in line of sight of the laptop. The wireless connection may run slower or
you may lose connection if the signal strength is low.
Note - It can takes a minute or two for Editor to connect to iLive. Surface
operation and metering may be interrupted for brief moments due to the
increased network activity as Editor connects. Audio is not affected. At one
point the Surface may freeze for around 10 seconds. Once connected normal
Surface operation resumes.
Note - If you experience interference with the wireless signal it may be due to
another wireless router operating in the local area on the same frequency, or
due to other wireless devices such as cordless telephones. In this case
access the router setup menu and change its wireless frequency (channel).
Note - If you experience difficulties connecting using wireless, try disabling
the LAN and other network connections on your computer, and vice versa.
For more complex network arrangements or to learn more about Ethernet
technology we recommend that you refer to your IT administrator or a web
based learning resource, for example:
http://compnetworking.about.com/cs/homenetworking/a/homenetguide.htm
http://compnetworking.about.com/cs/wirelessproducts/a/howtobuildwlan.htm
Controlling two iLive systems - It is possible to connect your computer
and two iLive systems on the same network so that you can run two Editor
sessions and switch between them, for example to control FOH and Monitor
systems. Make sure each iLive has a unique set of addresses. For example,
you could change the default 192.168.1.1, 2, 3 addresses of the second iLive
to 192.168.1.4, 5, 6.
(25 paginas)
(26 paginas)
(34 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales